Fluorescence Analyzer Fluorat-02-4М/ Fluorat-02-5М
FLUORAT-02 is a multifunctional fluorescence analyzer intended for analysis of water, soil, foodstuff, etc.
This instrument determines a wide range of analytes based on fluorescence, chemiluminescence, phosphorescence and photometry techniques.
- Low detection limit
- Fast analysis with low reagent consumption
- 4-in-1 instrument: fluorometer, chemiluminometer, photometer, and nephelometer
- High analytical selectivity compared to conventional photometirc instruments
- Capable of determination of total petroleum hydrocarbons (TPH), anionic surfactants, nitrites, B, U, Al, Zn and a large variety of analytes
- COD-analyzer with thermoreactor TERMION
- Equipped with dedicated software FLUORATE
FLUORAT-02-4M and FLUORAT-02-5M analyzer models
Both FLUORAT-02-4M and FLUORAT-02-5M models are capable of fluorescence, chemiluminescence and photometry measurements.
FLUORAT-02-4M also provides phosphorescence measurement using the time-resolved gating fluorometer mode. In particular, this mode is used to determine uranium and is characterized by a very high sensitivity and selectivity.
FLUORAT-02-5M can operate as a nephelometer for measuring turbidity.
- FLUORAT-02 analyzer (base set includes quartz cells, optical filters and Fluorate Software);
- Kits for analysis (on request);
- TERMION (thermoreactor for COD).
All Lumex instruments and equipment are covered by a 12-months warranty.
Our service engineers can install LUMEX equipment and instruments at a Customer's site and can provide personnel training specific to the Customer’s needs.
| Spectral range FLUORAT-02-5M | 250-900 nm |
| Spectral range FLUORAT-02-4M | 250-650 nm |
| Detection limit | 5 μg/L (phenol) |
| Types of cells | 10 mm (quartz) glass vials for COD |
| Power requirements | 110-240 Vac, 50 Hz, 36 V·А |
| Size | 305x320x110 mm |
| Weight | 6,5 kg |
The table below lists the analyses that can be performed by FLUORAT-02 analyzers. The detection limits for several sample matrices are given in the corresponding application notes.
| Water |
total petroleum hydrocarbons (TPH), anionic surfactants, nitrites, Al, B, U[1], Zn, turbidity[2], COD in natural, potable, and waste water As, Be and Se in potable water |
| Soil | total petroleum hydrocarbons (TPH) |
| Food | Se, vitamin B1 (thiamine), vitamin B2 (riboflavin) |
[1] with the FLUORAT-02-4M model only
[2] with the FLUORAT-02-5M model only
